Lab Incubator
Cat. No. IN-010
Standard Accessory : 2 stainless steel shelves
Technical Specification :
| Capacity (Liters) : 16 L
| Chamber : Stainless steel SUS#304
| Temperature range : Ambient + 5ºC to 75ºC (Adjustable)
| Control system control : Microprocessor PID controlled system
| Temperature display : Digital LED
| Sensor : PT-100
| Timer : Digital, 99hr. 59min + HOLD
| Temperature setting/Display : Digital LED
| Temperature uniformity : ±2ºC at 37ºC
| Temperature stability : ±0.1ºC at 37ºC
| Resolution : 0.1ºC
| Over-heat alarm & shutout : Yes, 4ºC above the set point
| Air convection : Forced convection by fan
| Air vent : Yes
| Quality standard : SO, CE, GMP, FDA, Japan
Key Features:
Technical Specification :
| Capacity (Liters) : 16 L
| Chamber : Stainless steel SUS#304
| Temperature range : Ambient + 5ºC to 75ºC (Adjustable)
| Control system control : Microprocessor PID controlled system
| Temperature display : Digital LED
| Sensor : PT-100
| Timer : Digital, 99hr. 59min + HOLD
| Temperature setting/Display : Digital LED
| Temperature uniformity : ±2ºC at 37ºC
| Temperature stability : ±0.1ºC at 37ºC
| Resolution : 0.1ºC
| Over-heat alarm & shutout : Yes, 4ºC above the set point
| Air convection : Forced convection by fan
| Air vent : Yes
| Quality standard : SO, CE, GMP, FDA, Japan
Key Features:
- Temperature uniformity & Stability are approximated which may be varied under the different operation environment.
- The above specifications are subject to change without advanced notice.
- Intended use: For microbiological studies for tissue culture and viruses incubation.
- A viewfinder (window) made by temper glass mounted on front door easy for monitoring specimens, which ensures to prevent from the possible broken glass door and also do not require to open door for monitoring samples.
- Features a double-walled chamber insulated by glass fiber for durability and good heat retention. (Rock wool can create respiratory disease and cancer.)
- Timer is working only when the set temperature has been stabilized. Functions audible & visible alarm against the over heating.
- Adjustable fresh air inlet port at bottom and top provides control of the amount of convective air.
- Built-in module temperature controller provides an accurate temperature display
- Safety devices:
- Over temperature alarm and shutout to 4ºC above set point.
- Independent safety switch protects specimen from excessive heating at 80ºC if the primary control fails.
- Optional leakage breaker with O.C.
- Audible & visible alarm indicated by lamp
- Timer is displayed by “END” when the incubation cycle is completed. When alarm is working.
- Memory stores the temperature and the past time if door is opened during operation